Provide your roof measurements to this free roofing calculator and calculate the roof area and its construction cost.
The roofing calculator permits you to calculate the location of the roof and discover how plenty you'll must pay to reconstruct it.
With this on line tool, you can get a free roof estimate right away
Use the Below equation for a roofing estimate:
Roof area = base area / cos[pitch(deg)]
In case you are going to construct a roof, then you will want to have the appropriate length of the roof so that you can have a precise roofing estimate.
Roofs are measured in square footage and the contractors take the undertaking on the idea of roof size and offer the roofing quote.
in this regard, an online roof calculator could be very beneficial. because it permits the contractors to get free roofing estimates.
Observe the below-stated steps to calculate the roof vicinity and cost:
pitch(%) = x / 12 × 100%
pitch(deg) = arctan[pitch(%)]
Roof Pitch desk:
| Pitch | Angle | Multiplier |
| 1/12 | 4.8° | 1.003 |
| 2/12 | 9.5° | 1.014 |
| 3/12 | 14.0° | 1.031 |
| 4/12 | 18.4° | 1.054 |
| 5/12 | 22.6° | 1.083 |
| 6/12 | 26.6° | 1.118 |
| 7/12 | 30.3° | 1.158 |
| 8/12 | 33.7° | 1.202 |
| 9/12 | 36.9° | 1.25 |
| 10/12 | 39.8° | 1.302 |
| 11/12 | 42.5° | 1.357 |
| 12/12 | 45.0° | 1.414 |
| 13/12 | 47.3° | 1.474 |
| 14/12 | 49.4° | 1.537 |
| 15/12 | 51.3° | 1.601 |
| 16/12 | 53.1° | 1.667 |
| 17/12 | 54.8° | 1.734 |
| 18/12 | 56.3° | 1.803 |
| 19/12 | 57.7° | 1.873 |
| 20/12 | 59.0° | 1.944 |
| 21/12 | 60.3° | 2.016 |
| 22/12 | 61.4° | 2.088 |
| 23/12 | 62.4° | 2.162 |
| 24/12 | 63.4° | 2.236 |
Let's suppose you have a house with the following roof dimensions:
Length (L) = 50 feet
Width (W) = 35 feet
Pitch = 7%
Now, estimate the roof size and cost.
Step 1: Calculate Base Area
Area = Length × Width
Area = 50 × 35
Area = 1750 ft²
Step 2: Calculate Pitch Angle
Pitch Deg = arctan[pitch(%)]
Pitch Deg = arctan[7%] = arctan[0.07]
Pitch Deg = 4.00 degrees
Step 3: Calculate Roof Area
Roof Area = Base Area / cos[pitch(deg)]
Roof Area = 1750 / cos(4.00)
Roof Area = 1750 / 0.9976
Roof Area = 1754.2 ft²
Step 4: Calculate Cost
Unit Price = $6 per ft²
Cost = 1754.2 × 6
Cost = $10,525.2
If you don't understand this calculation, then use a roof calculator. With it, you will be able to get the online roofing estimate (roof size and cost) instantly.
Calculate the roof length to determine the quantity of shingles you want on your venture and the cost of the roof through simply offering a few easy inputs to this roofing estimator. allow’s see how it works!
The standard roof pitch lies among 10 - 25 degrees. If your property is placed in a hilly region where snowstorm takes place too much, then it's desirable to choose a better (steeper roof).
You may want to have one or two shingles in step with square foot in keeping with the type and length of the shingle which you want to apply.
A Gable roof method to have a roof that has slope sides meeting at a ridge and alternatively, a shed roof manner to have a roof that consists of only one flat floor which slopes to at least one side.
Look at this handy tool that helps figure out how much roof stuff you'll need for your work. Calculates roof area from measurements, including length, width, and slope, for precise material estimation.
The calculator combines the extent and breadth of the hallway and modifies for incline (tilt). People think about adding extra parts like small roofs, shaded areas, and deep parts to give an exact width measurement.
Deploying a Tile Measurement Tool prevents excess or insufficient acquisition of materials, conserving time and financial resources. Using it can aid in financial planning by appraising the complete expenditure predicated on the essential components used.
Yes, several Roofing Calculators let users choose from assorted roofing substances such as asphalt shingles, steel, clay, or wooden shakes, modifying the approximation as needed.
To measure the pitch, use a level and tape measure. 2). Finally, write this after the keyword "Simplified".
Indubitably, as shingles are available in 100 square feet (1 square = 100 square feet), the tool computes the total roof surface and divides it by 100 to project the needed shingle packages.
Most Roofing Calculators utilize a waste percentage of 5–15 percent to compensate for trimming, jointing, and supplementary material required for intricate roof profiles. Users can manually adjust this percentage based on the project.
"Indeed, numerous calculators permit individuals to enter the expense per unit of area or each segment of roofing product, yielding an overall cost projection that encapsulates the underlay and other essentials.
Enhanced calculating devices empower individuals to fragment convoluted roofline configurations into smaller partitions, gauge each segment independently, and compile the collective expanse to achieve a more precise computation.
You can find trustworthy roofing calculators online on sites for making home better, tools for builders, and places selling roof things. Some mobile apps also offer advanced features for on-site measurements.
